DuraLED® Flush Mount Supplementary Side Direction Indicator Lamp

The popular DuraLED^®Flush Mount Supplementary Side Direction Indicator Lamps have been updated with a new integrated lens and rim design for improved aesthetics. Designed and manufactured in New Zealand these lamps are compliant with the Australian Design Rules (ADR). Interference-free EMC properties ensure no electronic interference with other electronic devices.
The lamps are a direct replacement for previous versions, so size and mounting holes remain the same. While legacy part numbers remain (eg: 2083), some updates have new 12-digit part numbers.

DuraLED^® flush mount lamps are completely sealed, highly shock, impact, and vibration resistant making them suitable for the demanding trucking environment. The flush mount range is made in New Zealand and supported by a lifetime warranty for complete peace of mind.

Trim options are either natural with the black body, or highly polished 316 stainless steel. Optic appears clear until illuminated.

RFCommSafe™ - To view and download more information please click here

To find a HELLA reseller near you, click here.

		DuraLED^® Lifetime Warranty All HELLA DuraLED^® products carry a Lifetime Warranty. Note: Lifetime means the economic life of the vehicle these products were first installed on.

2BM 980 868-301 2BM 980 868-317 DuraLED Flush Mount Supplementary Side Direction Indicator

2BM 980 868-321 2BM 980 868-337 DuraLED Flush Mount Supplementary Side Direction Indicator (Stainless Rim)

2BM 980 868-301 (2086) Supplementary Side Direction Indicator

2BM 980 868-321 (2086S) Stainless Steel Version

Rollover/tap the icons below for further details:

Fit and Forget

Fit and Forget by Design means every aspect, material and component of this lamp has been carefully chosen to ensure longevity in the most demanding environmental conditions.

LED Technology

RFCommSafe™

RFCommSafe™ products were developed in recognition that some radio communication equipment can be very sensitive in remote areas. RFCommSafe™ products are designed to ensure no interference with any other electronic equipment.

ADR (Australian Design Rules) Compliance

Product is compliant to all relevant Australian Design Rules to allow use on Australian and New Zealand roads.

Multivolt™

Multivolt™ for optimum performance in 12 and 24 volt systems.

High Impact Acrylic Lens Material

This specially formulated high impact acrylic (PMMA) offers enhanced resistance against long term UV-exposure and commonly used chemical washes, liquids, etc.

UV Resistant

HELLA New Zealand LED lamps are designed to withstand harsh environmental conditions and will tolerate long term exposure to high UV levels without fading or embrittlement.

Made in New Zealand

Options

DuraLED® Flush Mount Supplementary Side Direction Indicator Lamp

PART NO: 2BM 980 868-301
Legacy PN: 2086

Add to favourites

DuraLED® Flush Mount Supplementary Side Direction Indicator Lamp - Stainless Rim

PART NO: 2BM 980 868-321
Legacy PN: 2086S

Add to favourites

DuraLED® Flush Mount Supplementary Side Direction Indicator Lamp

PART NO: 2BM 980 868-317
Legacy PN: 2086BULK

Add to favourites

DuraLED® Flush Mount Supplementary Side Direction Indicator Lamp - Stainless Rim

PART NO: 2BM 980 868-337
Legacy PN: 2086SBULK

Add to favourites

Specifications

Optics

Optic appears clear until illuminated

Mounting

Surface flush mount.
Suitable for horizontal mounting.

Voltage

Multivolt^™ for optimum brightness in 12 and 24 volt systems.

Power Consumption

0.5W

Protection

Reverse polarity protection.
IP 6K7 (Protection against dust and temporary water immersion)
IP 6K9K (Protection against dust and high pressure/steam jet cleaning)

Cable Length

Pre-wired with 0.5m of sheathed multi-core cable.
Bulk pack pre-wired with 2.5m of sheathed multi-core cable.

Spare Part

9HD 980 858-007	Black screw caps (Pack of 4)
9AB 959 685-002	Stainless steel rim
9GD 980 867-007	Seal round 1x2 flush mount
9GD 980 867-507	Seal rectangular 1x2 flush mount
9GD 958 028-001	Seal curved 1x2 flush mount